Wednesday, 14 October 2020 Durst responds to COVID-19 with new innovative air disinfection system initiative Durst is responding to the COVID pandemic with another initiative - the Durst UVC-R Air Disinfection System, an innovative solution for reducing the viral load in indoor environments. This follows the company’s production of community masks, produced in April. Over the last few months, Durst has put its combined expertise in the laboratories, production, UV technology and its flow simulations and followed safety guidelines, to produce the Durst UVC-R Air Disinfection System. The System was produced in the Durst Labs, where the main transmission paths and descent rates of droplets and aerosols that transport virus-containing liquid particles were analysed, as well as the effectiveness of countermeasures with continuous air exchange and UV irradiation. The Durst UVC-R combines both air exchange and UV irradiation in one system, effectively reducing infectious aerosols, viruses and germs in indoor environments. Through an antiviral membrane, the room air is led into a closed system and irradiated with UV-C light. The disinfected air is continuously released back into the room through an air outlet. Key features of the Durst UVC-R include: • Closed, radiation-protected chambers with high-performance UV-C modules in airflow-optimised and mirrored channels. • Generation of ozone-free UV-C radiation with a wavelength of 254 nanometers. • Suction nozzles over the entire surface on both sides of the system at the level of the aerosol origin • Antiviral coating of the membrane surface. • Whisper-quiet with a typical noise level of 25 dB (A). "We checked the efficiency of the UV-C sources in our laboratories and analyzed the ideal exposure time and volumetric flow,” says Christoph Gamper, CEO and co-owner of the Durst Group. “An external laboratory for medical technology and disinfectants in Germany is currently in the process of verifying our results. At the same time, the efficiency of the Durst UVC-R is tested in real mode with ‘pseudoviruses’ or so-called bacteriophages. The Durst UVC-R’s centre disinfection zone measures 4 x 4 x 2.5 meters. However, Durst points out that no specific statements about square meters or volume size can be given as a general answer in terms of efficiency, as the efficiency depends on many factors such as temperature, air flows in the room, ceiling height, number of people, etc. Therfore Durst gives the following example for the efficiency: Four people sit at a table and are surrounded by a volume of 8 m³. Each person inhales and exhales about 0.5 m³ of air per hour, a total of 2 m³. Durst UVC-R disinfects 12.5 times this volume or 25 m³ in 15 minutes and 50 times the breathing volume of four people (or 100 m³ in one hour). If the UVC-R is placed in a larger room, a constant mixing of the room air around the disinfection center is taking place, which means that by the permanent release of purified air the viral load is reduced even outside the central zone. "We see in Durst UVC-R not only a preventive measure to reduce the viral loads,” said Christoph. “Together with the South Tyrolean industrial designer Christian Zanzotti we have developed a portfolio that can harmoniously be integrated into many interior concepts. Furthermore, the anti-viral coated membrane can be personalised with our digital printing systems." Durst offers the first series of the UVC-R as a Limited Edition for pre-order on www.durst-group.com/uvcr Within the next weeks the entire UVC-R portfolio will be available in a webshop. Delivery of the first series is planned to commence in early December. Previous Article Agfa announces new Jeti Tauro H3300 S LED large format printer Next Article Mutoh wins six best product awards at US Printing United Alliance If you have a news story, or story about an interesting project or installation please contact [email protected] Sign up to Image Magazine Newsletter. Print