Justin Pate and Mimaki on Car-Wrapping - from Commercial to Customisation - Image Magazine

Wide Format and Signage Hardware

Justin Pate and Mimaki on Car-Wrapping - from Commercial to Customisation

Justin Pate and Mimaki on Car-Wrapping - from Commercial to Customisation

Justin Pate, Wrap Institute founder, says ‘Car-wrapping has gone from an underground niche to a well-used technique to spruce up a vehicle without the long-term commitment. Until the late 2000s, car-wrapping was associated with commercial use, the sole purpose being to advertise. But then, around 2008 to 2011, there was a boom of colour change wraps for personal use, first across Europe and then in the USA. 

This technique is not related to advertising or customising, with PPF (paint protection film), a clear film which protects from chipping and scratches, seeing a surge of popularity in the past few years.’ 

He says that while paint jobs have been the staple, traditional method of decorating cars, he has seen massive growth in car-wrapping in the past few years. 

He believes both techniques have their pros and cons and that there needs to be a good paint base to wrap. However, he says that the release of new technologies, materials, and tools opens almost unlimited possibilities to wrapping.  For example, printers like Mimaki’s UCJV300 Series can produce an infinite number of vibrant designs on film in a wide range of colours and then seamlessly laminate them for longevity and cost effectively. 

Today there is a plethora of different inks on offer. Initially, solvent was the only go-to option. But, he says, ‘UV inks originally cracked in recessed areas, but new developments have meant that they now can withstand over stretching and extreme recessed areas, without sacrificing consistent colour. These inks, such as Mimaki’s LUS170 or LUS200, instantly dry, allowing for a quick turnaround time from printing to laminating without the need for gassing time. Unlike solvent inks, UV creates a slight texture on the film, which can be removed if desired.’ 

For an extensive fleet or when the job needs to happen swiftly, Pate states that UV or latex is his stand-out pick. However, extreme 3D shapes, i.e., bumpers, mirrors, and other recessed areas, may be better served by eco-solvent or Mimaki’s LUS200 inks. 

Again, Pate believes there are many options to choose from when it comes to film, the main three being cast, poly and mono. Cast has remained the most popular choice for car-wrapping, renowned for a high-quality finish, but polymer has become more common, with its more conformable qualities. 

Pate wraps up with ‘the car-wrapping industry seemed to be on the verge of exploding back in January 2020, and that growth has only been amplified throughout the pandemic. Many customers, unable to go away on holiday, turned to redecorating and customising their homes and vehicles as they spent more time in them. In addition, the practical benefits of car-wrapping, primarily the protective layer it creates around the car, have also boosted its popularity. While it requires a lot of physical skill, this changing and rapidly growing industry certainly make for an exciting venture.’ 

Previous Article swissQprint Launches Flatbed Generation 4
Next Article Kongsberg Announces New Oceania Distribution Partnership with GMS Pacific

If you have a news story, or story about an interesting project or installation please contact [email protected]

Sign up to Image Magazine Newsletter.

Print